logo
 

SERVICES

>> NEXT PAGE

“Service to man is service to God”.

“We provide you the latest and the best services on par with international standards”

The speciality of Sree Vijayalakshmi Borewells is that, that right from the beginning, it has started drilling operations by the slow rig, calyx rig to the latest Super Fast High Pressure Hydraulic Drilling Rigs both on surface and in well by 4 ½” , 6”, 6 ½” and 10” borewells.

We undertake drilling of 4 ½”, 6” and 6 ½” waterwell both on surface and in well and provide suitable submersible pumps. 

4 ½” tubewells were dug down both vertically and horizontally in open wells. Core drilling & telescopic drilling was done in India on a large scale for harbours, ware-houses, roads and railways and so on and so forth. Waterwells are dug for farms and factories, dairy farms, distilleries, hospitals, high rise buildings, resorts, golf courses, sports grounds, water parks, I.T. and B.T.parks, buildings, dams, railways, thermal stations in Gujarat, Rajasthan, Coastal areas of India and others.

TIPS FOR WATERWELL DRILLING:

  1. So far no permission is required by government to drill a well.
  2. Select a well established, experienced and renowned waterwell drilling contractor.
  3. Get a water Diviner and or Geologist to locate your waterwell point.
  4. Ask for recommended standard casing, slotted pipes or screens, if need  be.
  5. Do not use pits for wells, as pits water is polluted.
  6. The well casing must be one foot above the ground level and the top must be welded by a cap.
  7. Where projected well cause disturbance, you can conceal waterwell in the
    underground and build a chamber below the surface.
  8. The well must be three foot away from the wall for flushing when called for.
  9. Avoid drilling waterwells near pits, septic tanks, cesspools, roadways,
    railways, open drainages, refineries, tanneries and or garbage yards to avoid contamination.
  10. Test the well water in a lab to know whether it is potable or not for drinking.
  11. The casing and cap must be non corrosive.
  12. Get the yield report (drill log) from well driller to fix up suitable pump to pump up water.
  13. Select not the lowest bidder as he may not use standard materials, and  
    experienced  crew.
  14. We will give service ‘round the clock’.
  15. Special discount is offered who place 10 orders at a time.
  16. 10% discount on new spares will be given.
  17. Waste not and want not, because water is very very precious.
  18. The IIIrd world war will be waged because of international river water dispute, terrorism and or the like   

WATER DIVINING :
Water divining is the gift of the God. There are many devices of water divining. They are coconut, neem, pongamia  and coconut sticks(“y” shaped), gold chain, gold ring, pendulum, observing Sun’s rays and locating borewell point and satellite survey.

Finally getting water is purely the luck of landlord only.

Among all the above said methods coconut and stick methods are the best even in this Scientific and Computerized age.

MAP DOWSING :
Is other method of water well point location on a sheet of a paper by using green stick by a water diviner. This can be done by sitting at home. He will pin point the water well point by going to the land or site, where the water well is to be drilled. The water diviners will give accurate point to drill the borewell. They can tell approximate depth and yield of the borewell.

GEO-PHYSICAL SURVEY :

This is the scientific method of locating water well point by an Hydro Geologist. By this method, we can know aquifers, dykes, cavities, water bearing zones etc. In other words, this is also called resistivity method.

HOW DO YOU GET WATER OUT OF GROUND  ?
In a nutshall, ground water can be obtained by drilling or digging wells. The well water can be brought to the land surface by a monoblock, centrifugal, submersible, jet pump, hand pump or a compressor.

CONSTRUCTION OF THE WELL AND HOW WELL WORKS ?
To-day, most of the wells are drilled in overburden (sand, soil, clay or semi consolidated earth) upto the rock and erect pipes to arrest caving in or falling of mud into the well and drill in the rock (see picture) where in we encounter aquifers and find layers. In these layers, we can have ground water. Drilling a well requires the use of special equipment with excellent skill and expert know how. Casing will not be needed for the full depth of the well in solid rock. In western countries drilling and erection of casing is done by simultaneously to save the time, energy and money. Thus in this method a ‘pilot hole ‘ is built.

After the well is constructed, we can fix up suitable stainless steel submersible pump, jet pumps or air compressor according to the need of the needy. These pumps will pump up water.

COST OF WATER WELL AND PUMPSET :

Approximately a well drilled up to 500’ deep  with 50’ casing, collars etc may cost Rs.50,000/- and the submersible pump may cost Rs.30,000/-.

WHAT IS A SUCCESSFUL WELL ?
If a well yields 500 gallons per hour (G.P.H) it is called a successful well for domestic use. If it is more than 2000 gallons per hour, it will be good enough for agricultural, industrial and other purposes.

The sky is the limit for joy when water comes up like a natural spring.

WHAT IS A FAILED WELL  ?

If a well yields less than 500 gallons per hour (G.P.H) it is called a failed well. The land lords designs and desires will be dashed to dust when they doesn’t get water.

YIELD TEST :

Aftermath of successful completion of the well, yield test will be conducted by drilling company only and give the water available in the well that will determine to fix up suitable submersible pump.

WATER TESTING :

“Prevention is better than cure”

Usually, in India water is potable for drinking. Well of course, you can contact the department of Mines and Geology (M&G) Public Health Engineering (P.H.E) or any government agencies in your area for testing your well water.

FUNNY FACT :

Water is present on the Mother Earth in three forms, namely, solid, liquid and gas (vapour). Water vapour is present in the air at all temperatures. It is the only element that has three distinct forms.

OTHER IMPORTANT FACTS :

We communicate with our customers and provide information that allows them to make informal decisions, if called for.

WHAT IS A DRILLING RIG?

A drilling rig is an equipment which drills waterwells in the ground to get ground water. There are special rigs which will drill oil wells and gas wells.

WHAT IS A SLOW RIG  ?

It is slow in drilling as it is being handled manually with the help of a drill mast and it is either driven by diesel or power. Usually, it is deployed to drill a well where ever there is collapsible formation, and fix up casing. Thenceforth, fast rig has to re-set into the point and drill down to feasible depth.

WHAT IS AN HYDRAULIC RIG  ?
Hydraulic rigs are the rigs and tools which use fluid power to work quickly and fastly, and hence they are, therefore called Super Fast High Pressure Hydraulic Drilling Rigs. In other words, they are also called the cyclone Rigs.

4 ½” DRILLING :
We offer a versatile equipment to operate in areas of clearance of less than 12 feet height e.g. under canopies, inside compound, narrow spaces and buildings. The rig is having limited access and in areas where a remote power supply is needed. The compressor mounted on a truck will be parked 100’ away from a drilling site and air is passed through the hose to drill down the well.

6 ½” DRILLING :
Where ever 4 ½” rig can do drilling 6 ½” can’t be done because of less space. We can deploy 6 ½” rig in open fields, factories, or wherever more space is available.

Since 1972, our high-tech machines have provided high-quality, cost competitive drilling services to both public and private sector clients, particularly in Bangalore and India in general withover 36 years of combined drilling experience and a diverse fleet of rigs mounted on new vehicles.

Our drilling crew can construct any type of well in any location because our fleet of drilling equipments comprises every drill type-from direct –push probes to air and reverse rotary. We use down-the-hole (D.T.H) hammers, drag bits, and button bits in drilling any 4 ½”, 6”(inwell), 6 ½” and 10” borewells. The skill and experience of our crews combined with the quality of our equipment allows us to assure our customer that we can drill a water well in any terrain or time of the year for an affordable cost as well. Most of our employees have 15-20 years of experience. All of our drill crews are staffed by skilled and experienced personnel capable of operating all equipment with good drilling practice. We always provide the right equipment for the right job at right price.

VIDEO LOGGING :
Colour televised down-hole-video logging for water wells can be provided for, if necessary.

Infact, the Company has undertaken “Turn Key Jobs” and “Annual Maintenance Contracts”. Indeed we have built our reputation brick by brick and known for quality work, honesty, experience, and last, but not the least – customer satisfaction, which is our first and foremost commitment.

Since more than 80% of our fresh water is in underground and less than 20% exists on the earth’s surface in ponds and lakes, streams and reservoirs, it is easy to see how abundant ground water is compared to surface water and how important it is to protect and preserve this valuable resource. Drilled wells can protect generally greater purity of underground water more easily and securely than dug wells do. We have been both a “provider and protector” of our vast groundwater resource and we look forward to continuing in this remarkable role for years to come.
             
   

>>NEXT



 
Sri Vijayalakshmi Borewells (Regd) . Copyrights rights reserved. 2008. Powered by eConsultants